| Label Number | Parameter | Command/Monitor> |
|---|---|---|
| Sputter Ion Source | ||
| 1a | airflow, Cs boiler | amps, volts, deg.C |
| 2a | ionizer | amps, volts |
| 3a | suppressor | KV, mA |
| 4a | cone position | |
| 5a | bias | volts |
| 6a | gridded lens | KV |
| 7a | steerer | volts |
| Duoplasmatron Ion Source | ||
| 1b | filament | amps, volts |
| 2b | arc | amps |
| 3b | magnet | amps |
| 4b | probe | KV, amps |
| 5b | extraction | KV, mA |
| 6b | focus | KV, mA |
| 7b | attachment | KV, mA |
| 8b | heater | amps, deg.C |
| 9b | source gas, adder gas | flow rates |
| Ion Injection Section | ||
| 10 | inflection | amps, Kgauss |
| 11 | Einzel lens | KV |
| 12 | LE slit | amps: L,R,U,D |
| 13 | LE BPM | gain: hi/lo, on/off, amps |
| 14 | LE cup | in/out, amps |
| 15 | LE steerers | (1Y,1X,2Y,2X) volts |
| 16 | gridded lens | KV, mA |
| High Voltage Generator | ||
| 17 | LE drive motor | KW, start/off |
| 18 | LE column | amps |
| 19 | LE charge | volts, amps |
| 20 | stripper gas flow | increase/decrease |
| 21 | terminal | MV |
| 22 | corona | amps, in/out, position |
| 23 | foil | up/down |
| 24 | terminal steerer | up/down |
| 25 | HE charge | volts, amps |
| 26 | HE column | amps |
| 27 | HE drive motor | KW, start/off |
| Beam Analysis Section | ||
| 28 | HE BPM | gain:hi/lo, on/off, amps |
| 29 | HE cup | in/out, amps |
| 30 | HVEC Quad | #1:amps, #2:amps |
| 31 | HE steerers | (1X,1Y,2X,2Y) volts |
| 32 | object BPM | gain:hi/lo, on/off, amps |
| 33 | object slits | amps: L,R,U,D |
| 34 | analysis magnet | up/down, dial, amps, freq, Kgauss |
| 35 | image slits | amps: L,R,U,D |
| 36 | image cup | in/out, amps |
| 37 | image BPM | gain:hi/lo, on/off, amps |
| 38 | Quad A | amps, increase/decrease |
| 39 | Quad B | amps, increase/decrease |
| 40 | Quad C | amps, increase/decrease |